w3hello.com logo
Home PHP C# C++ Android Java Javascript Python IOS SQL HTML videos Categories
Unable to connect to local database in Visual Studio 2012 express For Web: (error 26)(C#)(SQL Server 2012)
You're getting that error because the (localDB)v11.0 is already a user instance of SQL Server. When you were using the SQLEXPRESS SQL Server instance, well, it's not. So, just get rid of the User Instance=true on the connection string.

Categories : C#

Unable to connect to OnVif enabled camera using C#
Configure the connection to the camera this way: ServicePointManager.Expect100Continue = false; var endPointAddress = new EndpointAddress("http://" + cameraAddress + "/onvif/device_service"); var httpTransportBinding = new HttpTransportBindingElement { AuthenticationScheme = AuthenticationSchemes.Digest }; var textMessageEncodingBinding = new TextMessageEncodingBindingElement { MessageVersion = MessageVersion.CreateVersion(EnvelopeVersion.Soap12, AddressingVersion.None) }; var customBinding = new CustomBinding(textMessageEncodingBinding, httpTransportBinding); var passwordDigestBehavior = new PasswordDigestBehavior(adminName, adminPassword); var deviceClient = new DeviceClient(customBinding, endPointAddress); deviceClient.Endpoint.Behaviors.Add(passwordDige

Categories : C#

Cannot connect to SQL Server 2012
I believe it should be (localdb) rather than (local) connectionstrings The error message does state (at the end): Connection string is not valid so you need to check it at the linked page.

Categories : C#

Connect to SQL Server 2012 using jTDs
I experienced the same symptoms after moving an application from MSSQL Server 2005 to MSSQL Server 2012. My workaround was to change the connection string from jdbc:jtds:sqlserver://sew20079.example.com/lunchbox;user=lunchbox_svc_user;password=xxx to jdbc:jtds:sqlserver://sew20079.example.com/lunchbox;instance=MSSQLSERVER;user=lunchbox_svc_user;password=xxx;TDS=7.0 For short, I added those two attributes at the end of the string: ;instance=MSSQLSERVER;TDS=7.0

Categories : Sql Server

Developing C# Winforms software using SQL Server 2012 in Visual Studio 2012 and running it on other system without installing SQL Server 2012
If you develop an application that use Sql Server 2012 as storage for your data then you need to install it in a way or another. There are numerous versions of Sql Server, like Sql Server Express and LocalDB. In every case you need the bits that supports your coding calls. This magazine article summarizes relevant infos on the various version of Sql Server I suppose that the right product for you is Sql Server LocalDB. A version of Sql Server that could be distributed easily with your application setup and doesn't require a complex installation procedure. However, if you don't foresee the need to escalate you application to a full Client-Server model and you need only a local storage for a single user, you could choose a single file database like Sql Server Compact Edition or SQLite or

Categories : C#

Unable to start debugging on the web server. Unable to connect to the webserver
Verify that your web.config has the following entry: <compilation debug="true" targetFramework="2.0" /> Note: If you are targeting framework 1.1, then obviously change the 2.0 to 1.1. UPDATE: The `targetFramework` attribute is new in .NET 4.0 and later, so to enable debugging on .NET 2.0 and earlier, then you cannot use the `targetFramework` attribute, like this: <compilation debug="true" />

Categories : Asp Net

Can't connect sql server 2012 with visual studios 2008
Based on some quick research, it looks like you need to install SP1 for Visual Studio 2008. Source

Categories : Sql Server

How to connect Crystal Report in VS 2012 to Sql Server 2008?
Did you also try putting in the ID and Password? Just having the server name isn't enough b/c it will attempt to log you in. After you log in it will generate a list of the available database tables you can choose from. For a server name you can also try .sqlexpress if you're using the free SQL Express version. Or .Local might work too. If that doesn't work, open up SQL Server Management Studio and look at the server name there. It will be the same name for Crystal Reports.

Categories : Dotnet

Php MSSQL(2012) giving error:Couldn’t connect to SQL Server
Ensure remote connections over named pipes are enabled and make sure you're using a backslash before the instance name: $myServer = "IPAddressSQLExpress "; If you'd like to enable connection over the default port (1433) this answer will help.

Categories : PHP

SMTP client returning "unable to connect to remote server" - Amazon SES server
There were three issues at hand: 1: The email address it was being sent from was not verified with Amazon, and neither was the recipient (verification of recipient only needed in sandbox mode) 2: The out port I was using, 587, is blocked by my company, which seems to be common practice 3: Using async can only be done when you specify the page uses async in the aspx "header"

Categories : Amazon

Connect with Visual Studio 2012 and C sharp to microsoft cloud TFS server
Take a look at service credentials, or try enabling alternate credentials on your account which will then allow you to authenticate using http basic auth. You probably want service credentials for what it sounds like you are doing though.

Categories : Visual Studio 2012

Not able to connect any remote database server after installing Visual studio 2012
Have a luck via running following command (netsh Winsock reset) from command prompt mentioned in social.msdn.microsoft.com/Forums/vstudio/en-US/2d11b6f9-3ada-4682-b643-c721a97af4ba/cant-connect-to-database-after-installing-vs-11-pro-beta

Categories : Sql Server

Unable to connect to xmpp server in phonegap with openfire server using strophe.js
See if you have properly configured the URL (BOSH_SERVICE), Openfire default URL is "127.0.0.1:7070/http-bind/" It would be good to use a console where show Strophe sends messages to the XMPP server and receives from the server to debug(look at "Exploring the XMPP Protocol: A Debugging Console"), It can be helpful the book “Professional XMPP - Programming with JavaScript and jQuery”. Basic strophe example: <!DOCTYPE html> <html> <head> <title>Strophe.js Basic Example</title> <script src='http://ajax.googleapis.com/ajax/libs/jquery/1.2.6/jquery.min.js'></script> <script src='strophe.js'></script> <script> //URL server openfire, by default 'http://Server-IP:7070/http-bind/' var BOSH_SERVICE = 'http:

Categories : Android

creating pdf on server gives error : Unable to connect to the remote server
Ignoring iTextSharp for a moment, try this following code on your production server, obviously replacing the URL with your problem URL. using(var w = new System.Net.WebClient()){ w.DownloadData(@"https://siteurl.com/pdf/11111111.png"); } If this gives you an exception then your server is having a problem talking to the host specified. Sometimes, NAT/Firewall rules have problems using external resolution for internal resources. You might need to update local DNS or add an entry to a local hosts file to resolve this. If the above doesn't give you an exception let us know and we can troubleshoot further.

Categories : Dotnet

PHP Unable to connect to MS SQL server
I just found my solution here. http://jimmyli.net/2009/03/php-unable-to-connect-to-mssql/ .problem was that the file ntwdblib.dll packaged with PHP5 was an old version. then i just replace with updated one from here http://jimmyli.net/wp/wp-content/uploads/2009/03/ntwdblib.zip Thx

Categories : PHP

Detect if (Android) phone encryption is enabled
Use getStorageEncryptionStatus() on DevicePolicyManager to find out the encryption status of the device. Source

Categories : Android

Unable to connect to SQL Server Database (ASP.NET C#)
You need to set the ConnectionString in your SqlConnection Object. Use : if (connString != null){ myConnection.ConnectionString=connString; myConnection.Open(); } Or just create the SqlConnection object after get the Connection String: SqlConnection myConnection = new SqlConnection(connString); myConnection.Open();

Categories : C#

Unable to connect to remote server
You need to set the credentials for Gmail var client = new SmtpClient("smtp.gmail.com", 587) { Credentials = new NetworkCredential("myusername@gmail.com", "mypwd"), EnableSsl = true }; client.Send("myusername@gmail.com", "myusername@gmail.com", "test", "testbody");

Categories : C#

mssql_connect(): Unable to connect to server
You have to specify the servername and the instance like in this example,I think: http://ca3.php.net/manual/en/function.mssql-connect.php EDIT: The following method: serverinstance does'nt work on unix systems... An instance is nothing more than specific port address different than 1433... so just discover the port on mssql server and then try to connect using: ip:port In unix the port is specified by : not by ,

Categories : PHP

Unable to connect to SQL Server database
Your web.config has a connection string. See this question for the full details on how to change that: ASP.NET Website Administration Tool: Unable to connect to SQL Server database

Categories : Sql Server

Unable to register SPN in windows 2008R2 to create SPN for SQL Server 2012 service account
Since the service runs as network service, I believe the account name will need to be the machine name. Tristan shows something similar in his blog at http://blogs.technet.com/b/tristank/archive/2006/05/08/spns-r-fn.aspx. His example is for HTTP but you should be able to change it to MSSQLSvc: For an App Pool running as NetworkService on the default port: SETSPN -A HTTP/intranetweb syd-inet-web01 (that last part's the machine name)

Categories : Sql Server

Unable to connect to the remote SMTP server
I think your gmail account is secured with mobile sms facility. If you access your gmail account from other macine than a sms will recieve from gmail for varification. Please off this functionality and try again.

Categories : C#

unable connect to server from application on device
you are getting android.os.NetworkOnMainThreadException : The exception that is thrown when an application attempts to perform a networking operation on its main thread. This is only thrown for applications targeting the Honeycomb SDK or higher. Applications targeting earlier SDK versions are allowed to do networking on their main event loop threads, but it's heavily discouraged. do your code this way in side AsyncTask

Categories : Android

unable to connect to sql server VM through web app hosted on another azure VM
In order to set connecrivity between a SQL server running on a VM to any other application you must make sure there are both connecrivity Settings for the SQL server and the VM it self : The VM : the vm has its firewall that blocks any access for the VM except the rules you define in the firewall, if you wish to access the vm you must open the relevent ports in the firewall. (BTW to ping the server enable ICMP on the firewall ...) Make notes : - if you wish to open a port inside the private networks its done by the firewall but if you wish to go outside the private network make sure you need to set endpoints in the azure portal and relate to the machine by that ports. if you wish to open the ports for relevant IPs only i would tell you that the azure endpoints (unless you set them by

Categories : Sql Server

Unable to connect to different HTTP port on server
When you remove the specific port number it defaults to port 80. So there is something that is blocking the other port. Try using the Telnet command to check if the port is open (you may have to enable telnet) As you have allready checked the firewalls, it could be urlscan or a network device.

Categories : Wcf

Why am I unable to connect to openfire server from another computer?
Possible reasons: Check your firewall. For checking stop your firewall for temporarily Check your browser setting. Check using ping that it works to your 127.0.0.1:5222

Categories : Java

Unable to connect to MSSQL server on Amazon RDS using NAT instance
Your problem is a little bigger than security group changes. The main problem is that your private vpc is private as in 'not internet accessible'. You have several options to connect from outside: Use a bastion machine as an intermediate hop (on the public net) and add relevant SG rules to hop form that machine into your precious DB. Your users will need to connect to that machine and then either run client tools on that machine to connect to the DB or setup a SSH tunnel to your DB (so your office machine could connect). This is not a great solution in term of users experience and in term of security (the bastion become a very big security risk) but it is simple to setup. (Note: since you are MS dude then please switch SSH for RDP [and cancel the tunneling thing]) Setup a VPN - bring a

Categories : Database

unable to connect to remote database located on server
Have you verified that you can connect to your database server from the machine you are running this code on? It looks like there is a network problem. A good idea as a first step to diagnosing MySQL connection problems is to always try connecting from the command line to rule out networking or credentials problems mysql -uuser -p -h49.**.***.115 databasename where "user" is the username "databasename" is the database and "49.**.***.115" is the ip of the database server.

Categories : Java

Unable to connect to Mongodb which is on windows server from ubuntu using php
A few comments: Please use new MongoClient instead of new Mongo. This should not output anything at all. You're just selecting a database and assigning it to a variable. Is that your whole code snippet? What did you expect the output to be? To figure out what is actually happening under the hood with connections you can use MongoLog. With this functionality you can track down what the driver is doing internally. You'd use it like: MongoLog::setLevel(MongoLog::ALL); MongoLog::setModule(MongoLog::RS); MongoLog::setCallback( 'printMsgs' ); function printMsgs($a, $b, $msg) { echo $msg, " "; }

Categories : PHP

unable to connect to Google Cloud Connection Server
Perhaps you should change the host to http://gcm.googleapis.com. Your error says "unable to connect tcp://gcm.googleapis.com:5235". GCM Cloud Connection Server (CCS) is an XMPP endpoint, running on http://gcm.googleapis.com port 5235.

Categories : PHP

unable to connect to remote server c# while sending mail
can you try shortening your code to something like the following var smptClient = new SmtpClient("smtp.gmail.com", 587) { Credentials = new NetworkCredential("isavepluscom@gmail.com", "123456789"), EnableSsl = true }; smptClient.Send("isavepluscom@gmail.com", "test@gmail.com", "Testing Email", "testing the email");

Categories : C#

Meteor + node-amqp: unable to connect via SSL to RabbitMQ server
Rather late response at this point, I'm afraid, but I just had a similar problem and it turned out I was piping plaintext into the RabbitMQ server socket. The server was expecting an SSL negotiation, but my client-side code hadn't correctly set up an SSL socket and instead used a regular socket, resulting in a "record overflow" just like this one- though mine was over STOMP and looked like this: =ERROR REPORT==== 19-Oct-2015::15:03:10 === STOMP detected TLS upgrade error on <0.1224.0> (127.0.0.1:52065 -> 127.0.0.1:61614): alert record overflow http://erlang.org/pipermail/erlang-questions/2012-December/071099.html was the giveaway. So, I'm providing this answer in the hope that the next person to view this question checks what their client is spewing into the socket.

Categories : Node Js

Unable to connect To the SQL server using the given connection String (using C# windows Application)
Try removing the port from your connection string (1433 is the default SQL port): cn = new SqlConnection(@"Data Source=192.168.1.2;Initial Catalog=Test;Integrated Security=True"); For a connection using sql authentication (which would eliminate trust issues between machines) use the following (replacing xxxx and yyyy with the appropriate user name and password): cn = new SqlConnection(@"Data Source=192.168.1.2;Initial Catalog=Test;Integrated Security=False; User=xxxx; Password=yyyy");

Categories : C#

Error unable to connect to remote server when upload file to remote server
Using the FTP protocol requires a dedicated FTP server software running on the remote machine. FTP cannot access network drives without it. If you just want to access files on your network, start with this SO question: Copying files to a mapped drive while user is not logged in (scheduled task) For security reasons, I strongly recommend a few steps before: a) Do not open root shares like C$. b) Create specific shares on your "remote" server, where you grant access only to users for that specific purpose. Further reading on FTP: http://en.wikipedia.org/wiki/File_Transfer_Protocol

Categories : Vb.Net

VS2012 ASP.Net error message unable to connect to the configured development web server
ASP.NET IIS Registration Tool (Aspnet_regiis.exe) would be one of my suggestions along with checking what identity is the Application Pool in IIS using as it may have limited permissions. Last but not least, run Visual Studio as an Administrator so you don't have UAC issues.

Categories : Asp Net

Unable to connect to ASP.NET development server error visual studio 2010
Even I faced this problem. while installing the visual studio 2010 we need to install IIS component.Follow the steps for installing "IIS 6 management capability". 1.goto control panel>>Turned windows features on or OFF>> 2.Internet information services >> web management tools>> check out checkbox (IIS management console)

Categories : Asp Net

Unable to connect / process query into MySQL Database on Wamp Server using PHP
You just define a global $dbc; that it's an empty variable and doesn't handle any connection to the database, but you call the query() function on it. This won't work. You should handle the connection properly, whatever driver you are using (mysqli, PDO etc..).

Categories : PHP

Very slow deploy on azure: 'Warning: Unable to connect to the remote server'
Run a repair on your Visual Studio 2012 installation by selecting the application name in Programs and Features and clicking on Change. If that doesn't work, you may also try to re-download your Azure subscription publishing profiles again (remove the current ones from VS first).

Categories : Azure

Cannot Connect to Windows server 2012 IIS 7 after installing PHP for windows
Because PHP Manager changed the configuration of IIS, I located a solution online that explained, very simply, that I needed to create an Global FTP site for the entire package. Poof!!! It works like a charm. Tada!!!!!!!!!! Thanks all...

Categories : PHP

Window Server 2012 & SQL Server 2012 within single VM on Windows Azure
Arun Rana, That should be possible and AFAIK there isn't any restriction for SQL Server licence to be used in Azure, however take a look at License Mobility through Software Assurance on Windows Azure. If your licence is from MSDN, then it now absolutely legal use it on Azure. If you are unsure about the licence problem and other litigation, you may spin up a VM with SQL Server 2012 pre-installed and this will solve your licence trouble (but right now only available with the combo of SQL Server 2012 on Windows Server 2008 R2). PS / Personal Experience : SQL Server + some server component isn't performing well for a Medium instance. Either split the server roles or consider choosing a bigger instance size like xLarge or A6.

Categories : Azure



© Copyright 2017 w3hello.com Publishing Limited. All rights reserved.